Factory of insulating equipment, LLC. manufactures fiberglass duct rodder for installation of cable channels. Fiberglass duct rodder consists of:

  1. 1.fiberglass plastic cord (rodder) with polymeric protective cover of different diameters: 3,5 mm, 6 mm, 11 mm;
  2. 2.set of steel caps (one with a directive head, the second one with an eye for attaching the cable);
  3. 3.steel trolley.

Standard fiberglass duct rodder:
11\150 (11 – diameter of rodder, mm; 150 – length of
rodder, m)
11\100 (11 – diameter of rodder, mm; 100 – length of
rodder, m)
11\50 (11 – diameter of rodder, mm; 50 – length of rodder, m)
6\70 (6 – diameter of rodder, mm; 70 – length of rodder, m)
6\50 (6 – diameter of rodder, mm; 50 – length of rodder, m)
3,5\50 (3,5 – diameter of rodder, mm; 50 – length of rodder, m)
3,5\30 (3,5 – diameter of rodder, mm; 30 – length of rodder, m)

Rodder can be purchased in any length without trolley.

the size of rodderprice for 1m (USD)the size of steel trolleyprice for 1pc (USD)
3,5 mm0,40small13
6,0 mm0,60medium15
11,0 mm0,90big with wheels30,0
set of steel capprice for 1pc (USD)set of steel capprice for 1pc (USD)
for 3,5mm4,0for 11mm7,0
for 6,0mm4,0

 Main parameters of fiberglass:
physical density – 1850-2150 kg/m3
breaking stress at tension, MPa, not less

  1. a) for the cross section up to 4.0 cm square 800
  2. b) for the cross section from 4,1 to 28,26 700

  tensile modulus – (0,35-0,4)105 Mpa
  the toughness perpendicular to the grain – 280 kJ /m2
  water absorption – 0,03 %
electrical surface resistivity – 1 x 1013 OM.
dielectric strength of 2 MV / m;
maximum permissible working temperature of -60; + 150 C0
 the cross sectional area, sq cm. 0,5 – 28,26.